Product ID:PRO-HIDE PLUS LATEX SATIN ENAMEL MIDTONE BASE
MSDS Date:07/30/1991
FSC:8010
NIIN:00F024476
MSDS Number: BNXRZ

PRATT AND LAMBERT INC

75 TONAWANDA ST
BUFFALO, NY 14240
US

Emergency Phone: (716) 873-6000

Info Phone: (716) 873-6000

Cage: 61196

PRATT AND LAMBERT INC

CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

TITANIUM DIOXIDE, TITANIUM(IV) OXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: <5%

OSHA PEL 20 MPPCF

ACGIH TLV: 2 MG/CUM (RESP DUST)

9.8

RTECS: 9999999WG

1.39 LBS/GAL LESS WATER (167 G/L LESS

RTECS: 9999999VO

1.66 LBS/GAL SOLIDS (199 G/L SOLIDS)

RTECS: 9999999VO

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION.
INGESTION: GASTROINTESTINAL IRRITATION. EYES: IRRITATION. SKIN:
ABSORPTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: RESPIRATORY IRRITATION. INGESTION:
GASTROINTESTINAL IRRITATION. EYES: IRRITATION. SKIN: ABSORPTION.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES/SKIN: FLUSH W/WATER
UNTIL RELIEVED. OBTAIN MEDICAL ATTENTION IN ALL CASES. NOTE TO
PHYSICIAN: ANY TREATMENT THAT MIGHT BE REQUIRED FOR OVEREXPOSURE
SHOULD BE DIRE CTED AT THE CONTROL OF SYMPTOMS & THE CLINICAL
CONDITIONS.

Flash Point Method:SCC
Flash Point:>200F
Extinguishing Media:CO2, ALL PURPOSE DRY CHEMICAL OR ALCOHOL FOAM.
POLYMER FOAM IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
MAY BE INEFFECTIVE, BUT MAY BE USED TO COOL EXPOSED CONTAINERS. IF
WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:CONTAINERS EXPOSED TO EXTREME HEAT MAY
CAUSE PRESSURE BUILD-UP, POSSIBLE AUTO-IGNITION, OR AN EXPLOSION.
COMBUSTIBLE LIQUID.

Spill Release Procedures:CONFINE IN SMALL AREA. USE ABSORBENT TO CLEAN
UP. PLACE IN CONTAINER FOR DISPOSAL.

Handling and Storage Precautions:AVOID BURNING, INCLUDING WHEN HEATED
BY WELDING OR CUTTING, WHICH WILL PRODUCE SMOKE, CO, OR CO2.
Other Precautions:AVOID EXCESSIVE HEAT.

Respiratory Protection:AS NEEDED.
Ventilation:LOCAL EXHAUST: IN SUFFICIENT VOLUME & PATTERN TO KEEP Protective Gloves:AS NEEDED
Eye Protection:AS NEEDED
Other Protective Equipment:AS NEEDED
Supplemental Safety and Health
BOILING RANGE: -28 TO 369 F.

Boiling Pt:B.P. Text:SEE SUPP
Vapor Density:>AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Percent Volatiles by Volume:68%

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESSIVE HEAT, & OTHER SOURCES OF
IGNITION
Hazardous Decomposition Products:SMOKE, CO, CO2

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE, &
LOCAL LAWS. THIS PRODUCT IS NOT CLASSIFIED AS A HAZARDOUS WASTE.
COMBUSTIBLE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.